How to Create a Photo Fabric Wall with KODAK Stick Ups

By Ritz Camera | Published: 2026-10-19

Category: How-to Guides

Learn how to create a photo fabric wall using KODAK Photo Fabric Stick Ups. This guide covers planning, printing, and applying your photos with repositionable adhesive.

Quick Answer

You can create a photo fabric wall using KODAK Photo Fabric Stick Ups, which let you print photos on fabric paper with a repositionable adhesive backing. Plan your layout, print your images, then apply and adjust them without worrying about residue.

Why Photo Fabric Stick Ups Work for Walls

KODAK Photo Fabric Stick Ups are designed to be applied almost anywhere, from college dorms and school lockers to bedroom walls and furniture. The repositionable adhesive means you can move your photos around until the layout feels right, and they can be removed without leaving a residue.

This makes them a great choice for renters or anyone who wants to change their decor frequently. Unlike traditional frames or permanent adhesive, you can refresh your wall whenever you like.

Planning Your Layout Before You Print

Before you start printing, measure your wall space and decide on the arrangement. A grid pattern is easy to plan, while a more organic collage can feel artistic but requires more trial and error.

Consider mixing photo sizes if your printer supports different paper sizes, but remember that KODAK Photo Fabric Stick Ups come in 8-1/2 x 11 inch sheets. Plan your spacing so the wall looks balanced, and have a rough sketch or use painter's tape on the wall to mark where each photo will go.

Step-by-Step Guide to Your Photo Fabric Wall

Measure and Plan Your Wall Space: Measure the width and height of the area where you want the photo wall. Decide on a layout—grid or collage—and mark the boundaries with painter's tape. This prevents you from printing too many or too few photos. A clear plan saves paper and adhesive.
Choose and Edit Your Photos: Select high-resolution images that will look good at the size you plan to print. Crop and adjust brightness or contrast in photo editing software. Avoid low-res images that will appear pixelated when printed. Always preview at 100% zoom to check sharpness.
Print Your Photos on KODAK Photo Fabric Stick Ups: Load the KODAK Photo Fabric Stick Ups into your inkjet printer following the manufacturer's instructions. Print a test page on plain paper first to confirm colors and layout. Then print on the fabric sheets, allowing ink to dry completely before handling. Let prints dry fully to prevent smudging.
Cut Around Your Photos (Optional): If you want a custom shape or smaller size, use scissors or a craft knife to cut around each photo. Leave a small border if you prefer a framed look. Cutting after printing avoids wasted fabric sheets.
Apply the Photos to the Wall: Peel the backing from each photo and press it onto the wall in your planned position. Start from the center and work outward to keep the layout balanced. Press firmly to ensure good adhesion. Smooth out air bubbles with a credit card for a flat finish.
Reposition and Adjust as Needed: Because the adhesive is repositionable, you can gently peel a photo off and move it to a new spot without leaving residue. Step back and check the overall arrangement, making adjustments until you're satisfied. Don't be afraid to rearrange—it's the key benefit of this product.

Product Facts

KODAK Photo Fabric Stick Ups, 8-1/2 x 11” - Photo Fabric Paper with Repositionable Adhesive: KODAK Photo Fabric Stick Ups have a repositionable adhesive that allows you to print and place your photos on college dorms, school lockers, textbooks, bedroom walls, doors, and furniture. This means you can experiment with placement and rearrange your photo wall without damaging your surfaces or the photos themselves.
KODAK Photo Fabric Stick Ups, 8-1/2 x 11” - Photo Fabric Paper with Repositionable Adhesive