Start with the gap, not the cable
A 1 ft HDMI cable is a problem solver for short, direct runs. Before you buy, measure the actual distance between the HDMI ports on your two devices. If the ports sit a few inches apart, a 1 ft cable keeps the connection tidy. If you need slack to route around a stand, a 1 ft cable may be too short.
The RitzGear 4K HDMI Cables 3-Pack gives you three 1 ft cables with braided nylon covering and gold-plated connectors. The listing specifies 4K at 60Hz, 18Gbps transmission, and HDMI 2.0 compatibility with laptops, desktop computers, TVs, and gaming consoles. Those specs matter most when the two ports are close and the signal path is direct.
What the RitzGear 1 ft cable is specified to do
- Ritz Gear 4K HDMI Cables | 3-Pack of 1 Ft. High-Speed 18Gbps HDMI 2.0 Connectors | Durable Braided Nylon, Gold Plating, 4K @ 60Hz Ultra HD, 3D, 2160p, 1080p & Ethernet Support for TV, Laptop & Gaming: Measures 1 ft in length and is described as a partner for transmitting data to a screen around your home or office. The short length is the defining feature. It suits port-to-port connections where excess cable would hang, bend, or clutter the space.

Ritz Gear 4K HDMI Cables | 3-Pack of 1 Ft. High-Speed 18Gbps HDMI 2.0 Connectors | Durable Braided Nylon, Gold Plating, 4K @ 60Hz Ultra HD, 3D, 2160p, 1080p & Ethernet Support for TV, Laptop & Gaming - Ritz Gear 4K HDMI Cables | 3-Pack of 1 Ft. High-Speed 18Gbps HDMI 2.0 Connectors | Durable Braided Nylon, Gold Plating, 4K @ 60Hz Ultra HD, 3D, 2160p, 1080p & Ethernet Support for TV, Laptop & Gaming: Supports 4K display at 60Hz and up to 18Gbps transmission. These are the headline specs for a 4K 60Hz short HDMI cable. Check that your source and display are set to the resolution and refresh rate you expect.
- Ritz Gear 4K HDMI Cables | 3-Pack of 1 Ft. High-Speed 18Gbps HDMI 2.0 Connectors | Durable Braided Nylon, Gold Plating, 4K @ 60Hz Ultra HD, 3D, 2160p, 1080p & Ethernet Support for TV, Laptop & Gaming: Uses a braided nylon covering and gold connectors. Braided nylon is relevant in a rack or tight space where cables rub against edges. Gold plating is a connector finish, not a guarantee of a specific signal result.
- Ritz Gear 4K HDMI Cables | 3-Pack of 1 Ft. High-Speed 18Gbps HDMI 2.0 Connectors | Durable Braided Nylon, Gold Plating, 4K @ 60Hz Ultra HD, 3D, 2160p, 1080p & Ethernet Support for TV, Laptop & Gaming: The listing describes universal compatibility with laptops, desktop computers, TVs, and gaming consoles. That is the supplied compatibility claim. It does not confirm every HDMI feature or every device combination, so verify your own ports before relying on it.
Plan a tight-space HDMI connection in four steps
Use this sequence when the two HDMI ports are close together and you want a clean, short run.
- 1. Measure port to port: Measure the straight-line distance between the two HDMI ports with the devices in their final positions. Add only the slack you need for a gentle bend. A 1 ft cable leaves little room for routing around corners.
- 2. Check port orientation: Look at which way each HDMI port faces. If both ports face the same direction, the cable may need to loop back on itself. If they face each other, a short cable can connect directly. The supplied information does not specify a minimum bend radius, so avoid sharp folds.
- 3. Confirm the signal you need: Decide whether you need 4K at 60Hz or a lower resolution. The RitzGear cable is specified for 4K at 60Hz and 18Gbps. If your devices are set differently, match the cable to the signal you actually plan to send.
- 4. Leave the connection supported: In a rack or behind a TV, support the cable so its weight does not hang from the port. The braided nylon covering helps with durability, but the listing does not provide a pull-force or bend test, so treat the connector as the fragile point.
Where a 1 ft HDMI cable earns its place
These are the setups where the short length is an advantage rather than a limitation.
- Equipment rack shelves: A braided HDMI cable in a rack can connect adjacent devices without a coil of excess cable. Keep the run short and avoid pinching the cable behind a shelf edge.
- Monitor and mini PC on one desk: If a small computer sits directly behind or beside a monitor, a 1 ft cable can reach between them. Measure first, because a stand or arm can add distance.
- TV and streaming device: A streaming stick or small box mounted close to the TV's HDMI ports may suit a short cable. Confirm the port spacing and whether the device needs to sit outside the TV's recessed area.
- Gaming console near a display: When a console sits on the same shelf as a monitor, a 1 ft cable can make the connection without a loop. The listing names gaming consoles as compatible devices, but check your console's HDMI output settings separately.
- Temporary testing and swaps: A three-pack lets you keep one cable at a test bench, one in a rack, and one as a spare. That is a practical use for identical short cables rather than a reason to force one into a long run.
1 ft vs longer RitzGear HDMI cables
The right length depends on the distance, not on the pack size. The same RitzGear line is also described in other lengths, so compare the job before choosing.
- 1 ft cable: Best for adjacent ports and tight spaces where excess cable is a nuisance. The RitzGear 3-pack supplies three identical short cables.
- Longer runs: If the devices sit more than a foot apart, a 1 ft cable will not reach. The supplied information does not confirm performance at longer lengths for this specific 1 ft product, so do not assume a longer run will behave the same.
- Pack size: The 3-pack is useful when you have several short connections or want a spare. It is not a substitute for measuring each run.
What the listing does not settle
The supplied record confirms 4K at 60Hz, 18Gbps, HDMI 2.0, braided nylon, gold connectors, and a 1 ft length. It does not provide a maximum bend radius, a pull-force rating, or a list of every supported HDMI feature beyond those named. It also does not confirm that every device will automatically negotiate the resolution and refresh rate you want.
Treat those gaps as planning questions, not defects. Check your device manuals for port clearance and supported signal formats. If you need a cable to survive repeated tight bends or heavy pulling, ask the manufacturer for guidance rather than assuming the braided cover removes that risk.
A simple buying check before you add the 3-pack to a cart
Measure each connection you plan to make. If the ports are within about a foot and the cable can run without a sharp fold, the RitzGear 1 ft cable is a sensible fit. If any run needs more distance or slack, choose a longer cable for that connection instead of stretching a short one.
The catalog price for the 3-pack is USD 16.87, compared with a catalog comparison price of USD 22.49. That context helps you judge the pack against your needs, but the length and port measurements remain the deciding factors.


